|
Product Details:
|
| Highlight: | Combo Hat profile roll forming machine,efficient profile roll forming machine |
||
|---|---|---|---|
Combo hat profile and wall angle profile rolling machine
Combo hat profile and wall angle profile rolling machine is a kind of combination of two profiles by one machine. This type rolling forming machine could be used to make two profiles by one machine at the same time.
Combo profile rolling machine advantages:
1. Two profiles could be made by one machine
2. Two lines could work at the same time.
3. Working speed can reach 45 meter per minute.
4. It takes less space and less worker. One worker can watch two production line.
Here we take one example for your reference:
Combo hat profile and wall angle profile rolling machine
Misunderstanding about Combo profile rolling machine:
1. COMBO is not cheaper than two machines as the base frame more bigger ,all motors, PLC hydraulic system are two sets, so no elements saved.
Combo hat profile and wall angle profile rolling machine parameters for your reference:
Main Machine:
Size: 4800х1800х1400Weight t: 3.2tons
Voltage:380V/50HZ3Phase(as customer’s request)
Roller fixer : Guide column
Frame : middle plate welded
Memorial arch frame type
Frame thickness:25mm
Drive mode: gear
Material of rollers: GCr12MoV
Material of shafts: 40Cr steel with tempering
Diameter of shafts: φ60mm
Number of rollers for C stud :16 rollers
Number of rollers for U channel :14 rollers
Main power: 5.5 kw for each part
Cycloidal planetary gear speed reducer
Punching H holes
This part will help you press your company logo on the finished products.
Power: hydraulic
Note, if you need to punch logos, please tell me in advance this price does not include.
Servo tracking shearing system
Material of blades: Gcr12 quenched
Power supply : hydraulic power
Frame : Pillar style with rack & pinion system
Stroke switch : non-contact photoelectric switch
Punching holes
The hydraulic station to punch holes, one station.
The molds are changeable. We will give related holes molds.
We put the hydraulic station with the machine, all the hydraulic pipe connected well.
We add the oiling system with the machine. As when you use the GI coil, and working high speed, the zine coating layer will be on the surface of rollers. By the oil adding, there will no such problem happened.
As to the design, not all profiles could be designed like this, some wide coil can not be designed like this. But the narrow strip coil could be designed like this.
With the protection cover, when machine working, it is more safe.
When you need to design such machine, please show me your drawing profile and then we can try to design machine for you.
Here is the machine working videos for your reference:
Contact Person: Amerilia cui
Tel: 008615127755788
