|
Product Details:
|
| Product Name:: | Drywall Metal Studs And Track Portable Cold Roll Forming Machine | Pump Power:: | 5.5kw |
|---|---|---|---|
| Control System:: | PLC | Cutting Type:: | Flying Cutting |
| Color:: | Blue Or According To Your Requirement | Speed:: | 15-30m/min |
| Highlight: | 5.5kw light keel roll forming machine,30m/min light keel roll forming machine,gear transmission drywall roll forming machine |
||
*Technical parameter of product line:
Galvanized Metal Stud Keel and Track Making Machine
| No. | Item | Stud Machine |
| 1. | Processing Material | GI |
| 2. | Processing Thickness(mm) | 0.8—1.0 mm |
| 3. | Material of Rollers | Cr12 |
| 4. | Diameter of Shaft | 40mm |
| 5. | Production Speed | 0-14m/min |
| 6. | Roller Driven | Gear Transmission |
| 7. | Cutting Model | Hydraulic Profile Cutting |
| 8. | Length Measurement | Encoder |
| 9. | Control Style | PLC |
| 10. | Operation Model | Button + Touch Screen |
| 11. | Total Power | 8kw |
| 12. | Voltage | 380V 50HZ or at buyer's request |
| 14. | Testing Material | Q195 |
*Process flow:
*This Drywall Light Steel Stud Track Making Machine is fully automatic and high speed producing continuously, one set of forming rolls can produce various sizes of Stud and Runner just by simply and easily changing the spacers, this enables the production of different sizes products on the same rollers.
1)Steel strip supporting frame:
Metal Stud Keel and Track Making Machine
| No. | Light Steel Keel Forming Machine, Gauge Steel Framing Price | |
| 1 | Suitable material | PPGI/Aluminium sheet/galvanized sheet/various sheet plates |
| 2 | Thickness of coil sheet | 0.8-1.5mm |
| 3 | Coil width | 50mm |
| 4 | Cover width | 38mm |
| 5 | Material of main frame | 350H steel |
| 6 | Diameter of Soild shaft | 75mm, high grade 45# steel |
| 7 | Roller |
Quenched and tempered treatment, hard chrome coated 0.05-0.07mm |
| 8 | Thickness of middle plate | 16mm |
| 9 | Forming station | 13stations |
| 10 | Drive type | By chain(1.0 inch) link bearing model 6210 |
| 11 | Power of main motor | 11kw with Cycloidal reducer |
| 12 | Power of pump station | 4kw |
| 13 | Forming speed | About 8-10m/min |
| 14 | Hydraulic cutting | Controlled by PLC |
| 15 | PLC | DELTA(TAIWAN)/Mitsubishi |
| 16 | Material of razor blades | Cr 12, quenching 58-62℃ |
| 17 | Frequency converter |
It has the advantage of slowing down before cutting, to ensure the length accuracy(±1mm, far better than industrial standard ±3mm). |
| 18 | Switch | CHNT |
| 19 | Transducer | SAJ |
Remark:
Above parameters are standard, we can design and make some change exactly according to your
requirements.
Contact Person: Amerilia cui
Tel: 008615127755788
