|Usage::||Use To Produce Rain Gutters||Production Capacity::||8-12 M/min|
|Voltage::||380 V, 50 Hz ,3 Phase||Power(W)::||3 Kw|
|Dimension(L*W*H)::||7.9*1.3*1.1m(L*W*H)||Control System::||PLC With Touch Screen|
|Material Thickness::||0.3-0.8mm||After-sales Service Provided::||Overseas Service Center Available|
steel pipe making machine,
pipe roll forming machine
Steel Downspout Roll Forming Machine 0.3-0.8 mm Coil Sheet Thickness
(1). Brief Introduction
The Roof Panels made by our Roll Forming Machine have beautiful appearance and bright color.
They are widely used in gardens, factories, resorts, hotels, exhibition halls, vacationlands,
ancient architectures and modern villas.
(2). Working Flow of Roll Forming Machine
Decoiling the sheet-Sheet guiding-Roll forming-Measure length-Cutting the panel-Panels to the supporter
(3). Technical Detail
|Suitable Material||Q235 or equivalent|
|Material Thickness||0.25-0.8 mm|
|Material Width||914, 1000, 1200, 1220 or 1250, as per the drawing|
|Dimension||About 7.9*1.3*1.1m(L*W*H) , as per the drawing|
|Working Space||About 17.9*2.8m(L*W) , as per the drawing|
You can set the length according to your need.
It is controlled by PLC
which can ensure the accuracy of ±1mm.
Automatically stop and cutting when it comes to the set
B. Components Details
|Roller Material||High grade 45# steel. Hard chrome plating, 0.05mm.|
|Main Frame||350# steel. More stable and no shaking.|
16mm. We use thicker plates to ensure stability
of our products.
|Forming Steps||11-16, according to the drawing.|
|Shaft Material||Φ70 mm, high grade 45# steel.|
Treating process: tempering- finish turning,
high rigidity, hard to deform.
|Cr12, hardness HRC60-62.|
|Treating process: heat treatment- plane abrasion- wire electrode cutting.|
C. Electric Components
|Suitable Power||380V, 50 Hz, 3 phase or according to your need.|
|Screen||5.7 inch touch screen, easy to operate.|
|PLC||Delta DVP 14ES|
well-adapted to various conditions, such as moisture,
DeltaVFD-M. It has the advantage of slowing down before cutting,
to ensure the length accuracy (±1mm,
far better than industrial standard ±3mm).
|Omron, made in Japan.|
|It features with high accuracy and stability.|
Components of machine in this line
|1.||Uncoiler||It support to material uncoil|
|2.||Feeding platform||It support to feed material to molding machine|
|3.||Main molding parts||It support roll forming the products according your requirement|
|4.||Control system||It control the machine's operation , such as cutting , speed ,ect.|
|5.||Hydraulic system||It offer the power for cutting system|
|6.||Receiving table||It used to receive the finished products|
Packing and delivery roll forming machine
The machine is bare packing.
Usually one machine can be put into one 20-40 feet container.
We use steel wire to fix the machine in the container.
Q:How is this machine's service life?
A:In the normal maintenance,the service life at least 8 years.
Q:How to maintenance?
A:If using frequently,best coating lubricant on the chain and two ends of the shaft every month,
replace the hydraulic oil every 1-2 years.
Q:What can you do if the machine broken?
A:Our machine's warranty period is 1 year,if the broken parts can't repair,
we can free send the new parts replace the broken parts to you except the solenoid valve,the solenoid valve you must pay the express cost yourself.
if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.
Contact Person: Amerilia cui