|
Product Details:
|
| Type:: | Tile Forming Machine | Production Capacity:: | 8-12m/min |
|---|---|---|---|
| Dimension(L*W*H):: | 6800mm*800mm*1200mm | Power(W):: | 3KW-20.5KW |
| Roller Material:: | 45#steel Chrome Plated | Cutting Blade Material:: | Cr12 Frequency Quenching |
| Control System:: | PLC(imported Brand) | Thickness:: | 0.8-1.2mm |
| Warranty:: | 12 Months | ||
| Highlight: | iron sheet making machine,roofing sheet roll forming machine |
||
Floor deck forming machine is galvanized steel as a raw material, after rolling cold-formed technology, die forming, mainly used for the production of steel works with floor boards, rolled into the floor boards after its V-shaped cross-section into categories, U-type, a ladder or a combination of several shapes, mainly used to make permanent formwork composite slab or concrete slab.
|
Manual Un-coiler
|
◊ Max Capacity: 5000kgs ◊ Inner diameter of coil: 400-600mm
◊ Manual with brake
|
|
Leveling Device
|
◊ Ensure the material level and straight
◊ The width can be adjusted |
|
Auto Main Forming System
|
◊ Width: According to Drawings
◊ Height: According to Drawings ◊ Thickness of sheet: According to Drawings ◊ Material: GI sheet coil or Colored sheet coil ◊ Motor Power: 18.5 kw forming system ◊ Roller material: C45 steel, chrome coated ◊ Diameter of shaft: 110 mm ◊ Transmission: by chain and gear ◊ Measuring accuracy: +/- 0.5 mm/M
◊ Base Frame: 400 H steel welded
◊ The machine base is assembled and welded by high quality steel
◊ Total Length of Machine: 11.8 m
|
|
Hydraulic Cutting Device
|
◊ Cutting way: pause to cut.
◊ Blade Material: Cr12 ◊ Hydraulic power: 4 kw hydraulic system. ◊ Hydraulic Station Structure: 300mm steel welded. Four guide columns. |
|
Electrical System
|
◊ Control system: HMI & PLC control panel.
◊ Power: 440V 50Hz (as per local requirement) |
|
Run-out Table
|
◊ Frame: 8# steel groove welded
◊ Roller type. ◊ Quantity: 1 pc |
FAQ
Q: Are you manufacturer?
A: Yes, we are manufacturer and trading company. We have our own technical team, and about 86,000 sq.m workshop. Welcome to visit us.
Q: What kind of payment term you can do?
A: We are flexible about payment terms, we can help you on financing also, please contact us for details.
Q: What info you need before you make the proposal?
A: The pipe diameter and thickness range which you need or the profile drawings, material information, you special requirements.
Q: What I should do if I just start a new business?
A: Contact us immediately, we provide free consultant pre-sales service.
Contact Person: Amerilia cui
Tel: 008615127755788
