|
Product Details:
|
| Tile Type:: | Colored Steel | Dimension(L*W*H):: | 8000*1520*1500mm |
|---|---|---|---|
| Power(W):: | 15kw | Voltage:: | 380v Or Any |
| Raw Material Thickness:: | 1.5-3 Mm | Roller Material:: | 45# Forged Steel |
| Material Of Cutting Blade:: | Cr12 | Shaft Material:: | Bearing Steel |
| High Light: | purlin roll forming machine,z purlin forming machine |
||
Building Material Z Purlin Forming Machine Metal Roll Former 11-16 Steps
Technical Detail
| Uncoiler (manual/automatic) | Weight Capacity | 3T |
| Inner Diameter | 460-520mm | |
| Outside Diameter | 1400mm | |
| Coil width | Max 600mm | |
|
Feeding and straightening device |
Pinch rollers | one pair, up and down |
| Straightening rollers | up three, down four | |
| Diameter of rollers | 75mm | |
| Roll Former | Frame type | single station |
| Forming Roller stand | about 14 Groups | |
| Shaft material | First grade 45# steel, | |
| Shaft diameter | 75mm | |
| Roller material | GCr15 | |
| Drive Type | Chain of transmission | |
| Motor |
15KW reducer with frequency control |
|
| Roll stand type |
split type, two sides forming separately |
|
| Size changing time | 15 min | |
| Automatic size changed by slide screw and angle gear which guarantee the complete synchronization and the material thickness is adjusted by eccentric distance of passive rollers. | ||
| Punching | Type | Hydraulic |
| Mould material | Cr12 | |
| Holes distance | Can be adjusted | |
|
Cutting 1 Hydraulic cutter |
Type | After-cutting, hydraulic |
| Material of mould | Cr12 | |
| Cutting tolerance | 10M+/- 2.0 mm | |
|
Cutting 2 Fly saw |
option | |
| PLC cabinet | PLC | PANASONIC |
| Length Controller | Encoder | |
| Operation | Touch Screen | |
| Transducer | Mitsubishi | |
| Hydraulic station | Power | 7.5 KW |
| Hydraulic pressure | 11 Mpa | |
| Runout Table | Non-power type | |
4. Main Parameters of C Purlin Roll Forming Machine
| a. General | |
| Model Number | C purlin, 80-300 |
| Suitable Material | hot rolled strip steel, Q235 or equivalent, 1.5-3.0 mm thickness |
| Material Width | 175-465 mm |
| Dimension | about 10.0*1.2*1.75 m (L*W*H) |
| Working Space | about 20.0*2.7 m (L*W) |
| Length Of Sheet | You can set the length according to your need, such as 1.5m, 3.2m or 6.7m. It is controlled by PLC, and can ensure the accuracy of ±2mm. |
| Cutting | Automatically stop and cutting when it comes to the set length |
| Forming Speed | 0-15 m/min |
| b. Components Details | |
| Material | Gr15. Treating process: rough turning-quenching, 62-64°C-finish turning-accurate grinding- polishing- hard chrome plating, 0.05 mm |
| Main Frame | 400 H steel. More stable, no shaking |
| Middle Plate | 20 mm. we use bigger plates, to ensure stability |
| Chain | 2 inch thickness |
| Shaft Material | Φ80 mm, high grade 45# steel. Treating process: tempering- finish turning, high rigidity, hard to deform. |
| Forming Steps | 13 |
| Detailed Forming Process | 3 steps for leveling- 12 steps for roll forming-5 steps for adjusting height and width-1 step on the coil-output part for adjusting deviation-1 leveling step to make it straight. |
| Mold Cutting | Cr12, hardness HRC60-62. Treating process: heat treatment- plane abrasion- wire electrode cutting |
| Control System | Suitable power: 380V, 50 Hz, 3 phase or according to your need. |
| Screen: Delta 7 inch touch screen, easy to operate | |
| PLC: Delta DVP24ES, well-adapted to various conditions, such as moisture, electromagnetic disturbance. | |
| Frequency converter, Delta VFD-M. It has the advantage of slowing down before cutting, to ensure the length accuracy (±1mm, far better than industrial standard ±3mm). | |
| Length measurement device: Omron, made in Japan. It features with high accuracy and stability | |
Contact Person: Amerilia cui
Tel: 008615127755788
