|
Product Details:
|
| Tile Type:: | Colored Steel | Dimension(L*W*H):: | 8000*1520*1500mm |
|---|---|---|---|
| Power(W):: | 15kw | Voltage:: | 380v Or Any |
| Raw Material Thickness:: | 1.5-3 Mm | Roller Material:: | 45# Forged Steel |
| Material Of Cutting Blade:: | Cr12 | Shaft Material:: | Bearing Steel |
| High Light: | purlin roll forming machine,c purlin roll forming machine |
||
Technical Parameters
| Material specification | galvanized steel and carbon steel. |
| Thickness | 2.0mm to 3.0mm. |
| Main Motor Power | 15 kw. |
| Hydraulic Power | 5.5 kw. |
| Web Width | Changeable. |
| Yield stress | 235 Mpa~550Mpa |
| Roll Forming Speed | 12 -15 m/minute. |
| Cutting Tolerance | +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm). |
| Manual Uncoiler | Max. capacity: 4000kgs. |
| Coil Inner Diameter | 508mm. |
| Voltage | 380V, 3 phase, 50HZ; or as per customer's requirement. |
| Numbers of Stations | 17 stations, with 4+5 straightening rollers. |
| Type of Cutting | Stop to Cutting, Post Cut, no blanking cut |
Material of Main Equipment
| Roller Material | GCr15 bearing steel, with quenching treatment. |
| Active Shaft Material | High grade S45C carbon wrought steel, diameter 80mm. |
| Electric Elements | PLC control console, touch screen and transducer, from Mitsubishi, Japan. Other elements, from Schneider, Germany. |
| Cutter Blades | Cr12MoV steel with quenched treatment, hardness HRC58~61, wear-resistance, good steel structure, long life. |
| Punching Die | Cr12 mold steel with quenching treatment. |
Working Flow
Uncoiling---Sheet Guiding---Straightening & Levelling---Hole Punching---Measuring Length &Shearing---Roll Forming---Sheet to support table
Standard Equipment of Machine
| 1) | Manual Uncoiler, 4-ton | 1 set |
| 2) | Infeed Guide | 1set |
| 3) | Straightening Device | 1set |
| 4) | Hole Punching Device | 1set |
| 5) | Pre-cut Device | 1set |
| 6) | Roll Forming Station | 1set |
| 7) | Rectification Device | 1set |
| 8) | Hydraulic Station | 1set |
| 9) | PLC Control Console | 1set |
| 10) | Product Support Table | 2 sets |
| 11) | Other Spare Parts | 1 box |
FAQ:
1. How to get a quotation?
Give me the profile drawing and thickness,this is the important.
Other spicific requirements is welcome,such as the speed,power and voltage you want.
2. Terms of payment:
30% T/T, Balance to be paid before shipping after inspection.Also we accept the payment L/C, O/A , D/P.
3. Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.
4. How long the machine could be made?
Normally speaking, welded pipe making machine could be made without 45 working days. If you need machines in a hurry, we can make it for you less than a month.
Contact Person: Amerilia cui
Tel: 008615127755788
