|Model NO.::||EN-130JK||Material Thickness::||0.4-0.7mm|
|Rolling Speed::||6-15m/Min||Roller Stations::||14 Stations|
|Hydraulic Cutting Power::||5.5kw||Material Of Shaft::||45 Steel|
|Transport Package::||Plastic Film, Container||HS Code::||845522100|
corrugated sheet roll forming machine,
roof and wall panel roll forming machine
Solid Shaft Roof Panel Roll Forming Machine 5.5Kw Produce Building Material
1. Work flow:
manual uncoiler-- roll forming machine-- PLC control box-- hydraulic system-- post cut-- output table
2. Technical Parameters :
Customized Specs Acceptable
|Cover width||Customized Profile|
|Type||380V/3PH/50HZ||Up to Practical Profile|
|Main Motor||As per design|
|Hydraulic||As per design|
|Transmission||Chain and Sprocket|
|Shafter||No.45 steel tempered|
|Rollers||No.45 steel chrome coated||Cr12 or other acceptable|
|Cutting Blade||Cr12 quenched|
|Press Mould||Cr12 quenched|
|Punch Mould||Cr12 quenched|
|Forming Speed||0-20m/min||Higher Speed Solution Available|
|Working Speed||Up to Length-set Cutting|
|Max. Capacity||5 T|
|Suitable coil OD||1200mm|
|Suitable coil ID||508/610mm|
|Max Coil width||1250mm|
|7||Forming Stand||8-30||Up to Practical Profile|
|8||Forming Shaft Diameter||55-100mm||Up to Practical Profile|
|9||Type of Cutting||Length-set cutting after roll formed||Pre-cutting acceptable|
|10||Control System||DELTA PLC and Inverter|
|11||Output Supporter||2 Pcs Simple Supporter|
Terms of Payment: 30% of the total contract value paid by T/T as down payment, the rest 70% of the total contract value to be paid by T/T after inspection by buyer in seller’s factory while before delivery.
Delivery: 30 days after receipt of advance payment
Service: we send technician to your country to fix the machine.The buyer should bear all the cost including: visa, Round trip tickets and suitable accommodation, also buyer should pay salary 60USD/day.
Warranty: 12 months limited warranty
During warranty: parts are free but buyer pay for the shipping fee
Q: Are you manufacturer?
A: Yes, we are manufacturer and trading company.
Q: What kind of payment term you can do?
A: We are flexible about payment terms, please contact us for details.
Q: What info you need before you make the proposal for a roll forming machine?
A: The profile drawings, material informations, your special requirements.
Q: What I should do if I just start to know roll forming machinery?
A: Contact us immediately, we provide free consultant pre-sales service.
Q: How to visit our company:
A: 1.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour),then we can pick up you.
Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours),then we can pick up you.
Fly to Guangzhou aiport: By air From Guangzhou to Beijing airtpot; By high speed train From Beijing Nan to Cangzhou Xi (1 hour),then we can pick up you.
Contact Person: admin